Assessment 3: Reflection

The blister is a shape that showcases smooth edges meeting sharp to form a bubble or pop out like shape.
Whilst partaking in this course i have had the opportunity to dive into the handling and manipulation of aluminium as a material. The ability to inflict any shape physically possible has enabled me to understand the capabilities of materials. More specifically, currently enrolled in construction, it enables me to understand that different materials within our industry can be used in different ways to sculpt different designs.

How does this effect our industry? 
We as construction managers are somewhat involved in the design and construction of the buildings and or projects so therefore this understanding has broadened the spectrum of knowledge within our field.

The below pictures represent the above statements whilst also showcasing the capabilities of aluminium and its properties in the construction world:


Comments

Post a Comment

Popular posts from this blog

The Tray

Image
Step 1: This particular project required students to work in groups. My partner and i were able to work effectively together to achieve the best finish possible. We were instructed to find a part from a different year group or from a different faculty. Step 2: The next step, using a scribe, was to measure 1cm from the edge to create a lip to be tapped up which was to become the outside of the tray.  Step 3: A circular weight was used to create our rounded edge on the four corner of our timbers. The timbers were measure and cut to be the EXACT same size so that our metal sheet would come out equal for each of us as we had to create two trays that mirrored each other as close as possible.  Step 4: The timber was sanded and cut to the rounded shape and placed accurately on the measure piece of metal being worked on, which was the first of two. The markings provided made it easy to find the exact point we were able to place the timber piece. The Metal piece was also cut
Read more

The Blister

Image
Step 1: To make the blister, once again we had to split up into groups in a similar fashion to the tray. I was with the same partner so it made the process of communication very easy. This time our projects did not have to match, rather it was a case of not enough material therefore we had to share resources. Step 2: Three to four people had to share a large sheet of material. we had to use a scribe and ruler once again to measure a piece of metal that fit on top of the stencil we were about to use in our group work. The metal had to be about 50mm more on every side to allow for shrinking and expansion. This piece was then cut on the guillotine. Step 3:  My partner and i selected the template of a teardrop that we wanted to use. There was a selection of over thirty, however we chose number FIFTEEN (15), which was largish type water drop. These templates were created and cut using the CNC laser cutter in the backroom of the workshop. Step 4: My partner and i had to take tur
Read more